Home > AR-15 > UPPER > GAS BLOCKS >

Clamp on Adjustable Low Profile Gas Block
ODIN Works Clamp on Adjustable Gas Block


 
Alternative Views:


Price: $99.00

Stock Status:In Stock

Product Code: GB-ADJ-CLAMP
QTY:

Description Installation Prop. 65 Warning for CA Residents
 
The Clamp on Adjustable Gas Block from ODIN Works is truly adjustable and packed with features. Machined from steel and black nitrided for durability, our clamp on adjustable gas block is equipped with a front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you’re done. An adjustable gas block can reduce your recoil, reduce wear, and allow for a variety of different custom options on your rifle. Why would you choose a clamp on adjustable gas block instead of a regular adjustable gas block? Two main reasons are because it won't mark up your barrel like regular set screws might, and you have greater control over the pressure that is applied on the barrel from tightening the gas block, ensuring that it's is evenly distributed.

A traditional, fixed gas block allows a fixed amount of gas to flow through the system. It's a one size fits all solution for rifles with gas systems. A fixed gas block will almost always be over gassed so that it can cycle the rifle with a variety of ammunition and other variables that effect the rifle cycling. However, there are many downsides to having an over gassed rifle. These downsides include excessive recoil, more wear and tear, running hotter and dirtier, and being less reliable, just to name a few.

A solution to all that? Enter the adjustable gas block. With an ODIN Works Adjustable Gas Block, you'll have 20 pre-set micro adjustments to reduce or increase the gas flow on your rifle. This allows you to run just the right amount of gas to cycle your rifle perfectly, while having minimal recoil (increasing accuracy), run more efficiently and cooler, less wear on your rifle, and allowing customizations such as running different bolt carrier groups, different buffer weights, adding a suppressor, or running different ammunition.

Simply put, an adjustable gas block is one of, if not the most effective way to improve how your rifle runs for the least amount of money.


The ODIN Works clamp on adjustable gas block will fit any barrel with .750" diameter and works with any caliber.
Features
  • Not for use with pistol length gas systems.
  • Fits inside all ODIN Works Forends.
  • Fits .750" diameter barrels.
  • Weight: 2.25 oz (includes detent ball, screws and pin).
  • Made from Carbon Steel.
  • Nitride finish. Heat treated Inconel adjustment screw and spring.
  • 20 adjustments.
  • Includes detent ball, cross pin, set screws, and hex wrenches.

    To Disassemble for Periodic Cleaning:

    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.
    Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.



Accessories
Adjustable Gas Block 7/64" Ball Wrench Adjustable Gas Block Rebuild Kit
Price: $12.00

Add
Price: $25.00

Add
ODIN Works Adjustable Gas Block Wrench Adjustable Gas Block Rebuild Kit

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 50 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Low profile adjustable gas block March 3, 2021
Reviewer: Blaine from Mona, UT United States  
224 Valkyrie having high-pressure signs on brass from the bolt with factory loads, replace the factory gas block with the Odin works low profile adjustable gas block, adjusted the gas block how Odin works recommends, my AR 15 now cycles smoothly without any high-pressure marks on the brass with a suppressor or without.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Taming the BEAST September 1, 2020
Reviewer: Newt from Portland, OR United States  
My Grendel build was horribly over-gassed.  It would ruin brass, stove pipe, throw brass way in front of the firing line and beat up my kid when I wasn't looking.  After setting things up, it now performs flawlessly and my son is back in the game.  Thank you!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great gas block August 21, 2020
Reviewer: Chuck from VA United States  
This is my second adjustable gas block from Odin Works, first clamp on.  Both went on easily and make tuning my rifles easy and efficient.  Both are running the perfect amount of gas with them.  Can't wait to run suppressed with them!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Product August 12, 2020
Reviewer: Alex from The Woodlands, TX United States  
Easy installation and solid construction

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Unique August 3, 2020
Reviewer: DAVID ANTONIO from Birmingham, AL United States  
Love the clamp on gas block

Was this review helpful to you?

View All Customer Reviews