Home > AR-15 >

6.5 Grendel | 18" DMR Intermediate | Barrel
ODIN Works 6.5 Grendel Barrel 18 inch Intermediate includes gas tube, 1:8 Twist, made from 416R stainless steel, hand lapped.


 
Price: $365.00

Stock Status:In Stock

Product Code: B-6.5-18-INT-TG
QTY:

Description Prop. 65 Warning for CA Residents
 
All DI barrels include stainless steel tunable gas block.
Features
  • Profile: DMR Heavy Profile (.850 behind gas block, .745 in front)
  • Length: 18”
  • Gas Placement: Intermediate
  • Rifling: Button 8 twist
  • Weight: 2.43 lbs
  • Made from 416R Stainless Steel
  • Hand Lapped
  • M4 Feed ramps
  • Serves as an HBAR barrel
  • 5/8-24 Threading
  • 1" MOA Guaranteed
  • SAAMI Spec Chamber
  • .750 Gas Block included
  • Intermediate gas tube included

Accessories
ATLAS Compensator - UPGRADE Adjustable Low Profile Gas Block - UPGRADE Clamp on Adjustable Low Profile Gas Block - UPGRADE CProducts Defense 10 RD 6.5 Grendel Magazine
Price: $95.00

Add
Price: $54.00

Add
Price: $64.00

Add
Price: $18.00

Add
ATLAS Compensator - UPGRADE Adjustable Low Profile Gas Block - UPGRADE ODIN Works Clamp on Adjustable Gas Block 10 RD 6.5 Grendel Magazine

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 11 Write a review »

  2 of 2 people found the following review helpful:
 
5 of 5 Amazing accuracy! May 13, 2020
Reviewer: Jerry Barber from Encinitas, CA United States  
My previous barrel would not shoot accurately or consistently no matter what I did. I tried different powders, different bullets and different scopes. Nothing worked. My local AR shop highly recommended a new Odin Works barrel. I ordered a 6.5 Grendel Intermediate barrel. Odin shipped it immediately with 2-day priority mail. The USPS took eight days to deliver it, but that's another story. I had the shop install it and headed for the range with four ladders (CFE223, IMR8208, Reloder 10x and H335) for the 90 grain Speer TNT and two ladders (CFE223 and IMR8208) for the Hornady 95 grain V-max. After shooting approximately 37 groups of four shots each, I had more sub-MOA groups than 1-inch plus groups, with four at 1/2" or less. The workmanship and quality of Odin barrels is superb.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 18” Grendel dmr April 6, 2020
Reviewer: Nathan from Clarence NY  
Finished the build on this rifle a few months ago and finally had a chance to get out and run it a bit. Used as many Odin parts as I could and would say they are top notch. Muzzle brake, stock, adjustable buffer, adjustable gas block, nitride bolt all Odin. At the range I was impressed with how well it performed. Had shots set at 50y zero in four rounds. First group of 5@50 yards were all one ragged hole. Unreal!! Cleaned bore quick and moved out to 100y and shot 5 and all within .75 with Hornady black. Awesome!! Went to 200 and still right within 1”. Wow!! Can’t wait to dial in gas block and buffer to smooth out recoil more but still not bad at all so?? Overall can’t wait to break this in more and can’t wait for deer and coyote season!!! Thanks Odin for a great build with nice products and wow!! What a barrel!!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Great barrel kit March 3, 2020
Reviewer: Joe Fannin from Spicewood, TX United States  
Received packaged well and fast. Including the adjustable block and tube make the swap fast. Finish and bore quality are first rate and initial testing is showing consistent  5 shot sub moa groups.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Great barrel December 10, 2018
Reviewer: Tyler from Sarasota, FL United States  
Great barrel, little heavier than I thought, but the quality is fantastic.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 awesome June 24, 2018
Reviewer: MICHAEL ONeal from Bunker hill, WV United States  
Got to shoot it a little yesterday and was very happy with the results. Factory ammo shot at 1 moa and 5 rds of my handloads shot .7 moa. Think once I get more time to refine the load it will be a real tack driver. Very happy and will get my next barrel here as well.
Thanks Mike

Was this review helpful to you?

View All Customer Reviews