Home > Barrels >

22 Nosler Barrel 18" DMR Rifle
22 Nosler Barrel 18" DMR Rifle


 
Price: $305.00

Stock Status:In Stock
Product Code: B-22N-18-DMR-R-TG
Qty:



The following items are included FREE with this product:

Description
 
Recognizing what the new 22 Nosler round has to offer, ODIN Works is proud to introduce the 18" DMR Rifle. Includes the stainless steel tunable gas block.
Technical Specs
  • Profile: DMR
  • Length: 18"
  • Gas Placement: Rifle
  • Made from 416R Stainless Steel
  • Hand-lapped
  • Weight: 2lb 8oz
  • M4 Feed ramps
  • 1/2-28 threading
  • 1" MOA guaranteed

Accessories
Rifle Gas Tube Adjustable Low Profile Gas Block - UPGRADE Clamp on Adjustable Low Profile Gas Block - UPGRADE ATLAS Compensator - UPGRADE
Price: $12.00

Add
Price: $54.00

Add
Price: $64.00

Add
Price: $85.00

Add
Rifle Gas Tube ODIN Works Clamp on Adjustable Gas Block

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
22 Nosler DMR Barrel August 23, 2017
Reviewer: Jeremy H from MN  
Should have started with Odin
I first started my 22 Nosler build with another brand.  Not going to name names but i couldn't get anything i put in it to shoot anything better than 1 1/2" groups consistantly.  Factory ammo, handloads.  Different bullets, powders, didn't matter.  
I have never shot an Odin barrel before but after reading reviews on them decided to give them a try.  Got the Odin barrel installed, first set of handloads.  7, 3 shoot groups for an average under .6 of an inch.  I am sold.  I just wish I would have started with Odin.  Thanks Odin for a great product!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
22 Nosler DMR Barrel June 11, 2017
Reviewer: red mist from AR  
My second Odin Barrel. That Wylde 3 gun was so good I had to try another. This one has an atlas comp, aim lw bolt with taacom buffer. Set up like a 3 gun carbine. Recoil is nearly nothing, shoots fast and flat will be a coyote nightmare. Factory 77's shot .513 avg. 68 gr hornady and varget are great. Best load was just under 1/4 and only 2 loads tried were over 1/2". Went from starting to over max in .2gr increments. Add were mag fed and semi auto. Tried BLC-2, most were over 1/2, but less than 1". The upper was squared before the barrel was installed. Results similar to my other Odin Barrel. These guys make good stuff at a reasonable price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Laser Beam April 15, 2017
Reviewer: StoneHendge from Vail, CO  
Have this with the Odin clamp on adjustable gas block. Put 40 rounds throughit it my first day out as I worked through some build issues. Got the build's hardware issues worked out, mounted up a 2.5-10x32 Vortex Viper with XLR reticle and took her to the range today with some factory Nosler 77 grain ammo. Zeroed it and then shot one five shot 100 yard group. First 4 shots were 0.51". I then of course pulled the last and the 5 shot group ended up at 0.82". I then moved on to steel at distance and was consistently ringing a 10" round plate at 450 and was getting hits more often than not on an 18" rectangle at 750 holding for a 10mph wind. This cartridge is a blast and the barrel is spot on. It will be a 1,000 yard 22 caliber carbine on a calm day at my elevation once I get it to the 1,000 yard range. This is my first Odin barrel but it certainly won't be my last! Also note that the factory 77 grain ammo was right at 2950 fps just like the box says.

Was this review helpful to you?