Home > AR-15 > UPPER >

.936" Adjustable Low Profile Gas Block
ODIN Works .936 Adjustable Gas Block


 
Alternative Views:


Price: $89.00

Stock Status:In Stock

Product Code: GB-ADJ-.936
QTY:

Description Installation Prop. 65 Warning for CA Residents
 
A tunable gas block is great, but the Adjustable Gas Block from ODIN Works has pin point adjustability and is packed with features. Machined from steel and black nitrided for durability, our adjustable gas block is equipped with a front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you’re done. An adjustable gas block can reduce your recoil, reduce wear, and allow for a variety of different custom options on your rifle.

A traditional, fixed gas block allows a fixed amount of gas to flow through the system. It's a one size fits all solution for rifles with gas systems. A fixed gas block will almost always be over gassed so that it can cycle the rifle with a variety of ammunition and other variables that effect the rifle cycling. However, there are many downsides to having an over gassed rifle. These downsides include excessive recoil, more wear and tear, running hotter and dirtier, and being less reliable, just to name a few.

A solution to all that? Enter the adjustable gas block. With an ODIN Works Adjustable Gas Block, you'll have 20 pre-set micro adjustments to reduce or increase the gas flow on your rifle. This allows you to run just the right amount of gas to cycle your rifle perfectly, while having minimal recoil (increasing accuracy), run more efficiently and cooler, less wear on your rifle, and allowing customizations such as running different bolt carrier groups, different buffer weights, adding a suppressor, or running different ammunition.

Simply put, an adjustable gas block is one of, if not the most effective way to improve how your rifle runs for the least amount of money.


The ODIN Works adjustable gas block will fit any barrel with .936" diameter and works with any caliber.
Features
  • Not for use with pistol length gas systems and high pressure rounds.
  • Fits .936" diameter barrels.
  • Weight: 2.45 oz (includes detent ball, screws and pin).
  • Made from Carbon Steel.
  • Nitride finish.
  • Stainless steel adjustment screw and spring.
  • 20 adjustments.
  • Includes detent ball, cross pin, set screws, and hex wrenches.
  • Neither Compatible with the RUNE nor the RAGNA.
  • To Disassemble for Periodic Cleaning:

    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.
    Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.


Accessories
Adjustable Gas Block Rebuild Kit Adjustable Gas Block 7/64" Ball Wrench
Price: $25.00

Add
Price: $12.00

Add
Adjustable Gas Block Rebuild Kit ODIN Works Adjustable Gas Block Wrench

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 23 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Adjustable Gas Block August 28, 2020
Reviewer: Jim F.  
It would be simple to write a glitzy review however, to keep it simple...The fit and finish was right on and it works.  What else needs be said...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Question August 12, 2020
Reviewer: CG from Colorado  
Can you use this for a 12.7x42?

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Odin Works adjustable gas block May 30, 2020
Reviewer: keith dixon from camden, TN United States  
great product, mounted and adjusted quickly, just what I needed for my pistol build. Thanks A+

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A Must Have May 15, 2020
Reviewer: Tanner Hatley from Norwood, NC United States  
It's a must have if your building an AR easy to adjust and functions great I will be a repeat customer due to the fast shipping I received my product in 2 days

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 .936 Adjustable Low Profile Gas Block May 14, 2020
Reviewer: John Tingue from Denio, NV United States  
Nice product.Perfect fit and relieved the gas blow back my customer was having with his new suppressor.

Was this review helpful to you?

View All Customer Reviews