Home > AR-10 > UPPER > COMPLETE UPPERS >

Complete Upper - 17.5" M-LOK O2 Lite Forend 6.5mm Creedmoor 22" XL Rifle
Complete Upper - 17.5" M-LOK O2 Lite Forend 6.5mm Creedmoor 22" XL Rifle
 
Alternative Views:
Price: $1,249.00

Stock Status:In Stock

Product Code: CU-17-ML-O2-6.5-CM-22-ADJ-2.06
QTY:

Description Prop. 65 Warning for CA Residents
 
The long awaited and anticipated ODIN Works AR10 upper is finally here. Built on a forged upper and designed to work with DPMS Gen1 pattern lowers, this complete upper is ready to enhance your shooting experience. The 22" stainless steel barrel features a Tactical Match style profile with an XL Rifle gas system and the 1 MOA guarantee. The XL rifle system is 2" longer than rifle length and handles high pressure cartridges without issue. The included BCG features a black nitride finish and is considered multi caliber, another high pressure feature. Add in the famous ODIN adjustable gas block and you have a setup that is going to work and shoot really well. With your choice of MLOK or KeyMod 17.5" O2 Lite, you really can't go wrong.
Features
  • Forged upper
  • ODIN 22" Tactical Match XL Rifle 6.5mm Creedmoor barrel
  • XL Rifle Gas systems are 2" longer than standard rifle
  • ODIN Adjustable gas block
  • ODIN AR10 17.5 O2 Lite M-LOK Forend with accessory rail
  • ODIN AR10 Multi Caliber BCG with Black Nitride finish
  • ODIN eXtended Charging Handle
  • ODIN Thread protector
  • ODIN Warranty
  • Ships assembled

Accessories
ATLAS Compensator - UPGRADE KMod B1 Handstop
Price: $95.00

Add
Price: $49.00

Add
ATLAS Compensator - UPGRADE ODIN Works KMod B1 Handstop

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
1 of 5 3MOA April 15, 2024
Reviewer: Tav H from Texas  
I think I got a lemon.  This review has been a few years in the making.  I shot this upper suppressed and bare muzzle.  I used Hornady 140 ELDM, Federal 140 GMM, and Berger.  I could not get any decent groups at 100 yards.

I also swapped scopes.  Did full cleaning for carbon and copper and confirmed with a borescope.  Re-torqued the barrel nut, handguard and gas block.  It just would not shoot well at all.  

The best group was 1.5", but usually it was 2" to 3".  

I like that the handguard is nice and light, but doesn't have much flex.  Tuning the gas block was easy.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Love it August 22, 2020
Reviewer: Monte from Ohio  
I have had a great time shooting this rifle.  Great round and great job by Odin Works!  Is there a chance I could get the diameter and thread pitch at the end if the barrel?

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice! June 20, 2020
Reviewer: Maurice De Vidts from Texas  
Love the upper!  Super light forend and great quality quality! I paired it with a TriggerTech Diamond trigger, Thunderbeast suppressor and a Sightron Sight.  very pleased!


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Arrival review January 31, 2020
Reviewer: Michael Combs from Emporia, VA United States  
This upper arrived in excellent condition and in a timely manner. Examination revealed high quality in both materials and workmanship. The fit to my DPMS pattern receiver is tight. My build is not yet completed so I will withhold further comments until bench tested.  I think will be five star if it is as accurate as expected.  Nice work,  Odin Works

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 6.5 creadmoor upper July 12, 2017
Reviewer: Stephen Morgan from Nanjemoy, MD United States  
This complete upper is built with remarkable precision. As are the other uppers from Odin works.I haven't had the time to shoot it yet but I have no doubt it will be as accurate as my other Odin works barreled actions.

Was this review helpful to you?