Home > AR-10 > UPPER > FORENDS >

O2 Lite AR-10 M-LOK Forend - 17.5"
O2 Lite 308 M-LOK Forend - 17.5"

Alternative Views:

Price: $230.00

Stock Status:In Stock

Product Code: F-17-ML-O2-308

The following items are included with this product:

Forend Adapter Size*:

Description Prop. 65 Warning for CA Residents
The 308 forend from ODIN Works is a versatile system for your AR-10 builds. Designed to work with DPMS pattern uppers, the forend works with both high(2.06”) and low(2.00”) profiles. The O2 Lite is the latest and lightest of all the ODIN Works forends. Precision machined from 6005-T651, the O2 lite is a full 20% lighter than its predecessors. All ODIN Works forends are free floating for accuracy and hard anodized for durability.
  • Please see picture above to choose the correct forend adapter size.
  • Forend adapter threading: 1 7/16-16 (Armalite adapter threading: 1 7/16-18).
  • Weight: 8.05 oz (without hardware-hardware weight: 2.7oz)
  • Free float.
  • Made from 6005-T651 Aluminum.
  • Inside diameter: 1.75"
  • Outside diameter: W-1.95" H-2.23"
  • Engineered with advanced ergonomics for comfort and improved performance.
  • Accessory rails can be placed at 3, 6, and 9 o'clock positions and can be joined to create continuous Pic Spec Rail.
  • QD sling mount positions at 3 and 9 o'clock.
  • Key slots double as QD sling mount positions. Made to fit Magpul QD.

1 3/8" Jumbo Crowfoot Wrench KMod B1 Handstop K-Pod Bipod Adapter
Price: $30.00

Price: $49.00

Price: $34.00

ODIN Works 1 3/8" Jumbo Crow Foot Wrench ODIN Works KMod B1 Handstop ODIN Works K-Pod

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 8 Write a review »

  3 of 3 people found the following review helpful:
5 of 5 17.5” over 18” 762 barrel January 21, 2020
Reviewer: joe from dallas  
i have the 17.5” O2-Lite on a 18” AR10 setup & it looks impressive. removing the old hand guard & gas block was the hardest part in my circumstance. install of the O2 Lite & 2.06” adapter onto my DPMS “high profile” receiver was a piece of cake. after i got the gas tube aligned within, i tightened the barrel nut with a crescent wrench & hooked up a new adjustable gas block. my weapon looks so dang sexy now. part sexy, part BEAST. too bad that i can’t post a couple of pictures. everybody would be sold on these rails if they could see what i’m working with now. i love it.

PS a crows foot wrench is not required to torque the barrel nut. a good size adjustable wrench will do. if you really wanted to invest money on gun smith tools, a reaction rod aka torque rod is probably your best bet. i don’t have 1 but to properly torque & loosen barrel nuts & muzzle devices the reaction rod is called for.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
5 of 5 Update in my previous review** December 16, 2019
Reviewer: Dan Weinberg from CT  
I would like to say Mitch made everything right and gave me a credit for the rail in my previous review. First class customer treatment and I plan on using it for more Odin Works products possibly their clamp on gas block. Thanks guys!

Was this review helpful to you?

  3 of 4 people found the following review helpful:
1 of 5 Trying To Return November 5, 2019
Reviewer: Dan Weinberg from CT  
Was told I could return this rail for my money back and now finding out that may not be the case. The problem is they said I could switch between the shorter chevron pattern rail and made it sound seamless. Little did I know the aluminum barrel nut adapter needs to be replaced after every installation since the screws are steel and strip out the adapter nut. I have heard this is relative to the AR10 platform mostly since the addapters provides less room for the screws to grab into. Waiting and hoping Mitch is able to help me get my money back for this rail.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
5 of 5 Outstanding product and service September 6, 2019
Reviewer: John from Florida  
I recently purchased an O2 Lite forend for my AR-10 build.  I had a little trouble during the assembly process, so I contacted Odin Works (Travis) for some help. I received a response very quickly and the solution was right on the money.  They sent me out the part I needed fast and got me up and running.  A great product is always good but outstanding customer service is getting harder to find these days. I was very impressed with Odin Works and I will be recommending them to all of my friends for their builds.  Thanks Guys and Gals at Odin Works, you all are the best!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Best handrail money can buy February 8, 2019
Reviewer: Eugene from LA  
Its so light my wife couldn't believe she handles  17.5 inch metal part.

Was this review helpful to you?

View All Customer Reviews