![](/v/vspfiles/templates/Fuego/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif) |
![](/v/vspfiles/templates/Fuego/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/Fuego/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif) |
![](/v/vspfiles/templates/Fuego/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif) |
Features
- Not for use with pistol length gas systems and high pressure rounds.
- Fits inside all ODIN Works Forends.
- Fits .750" diameter barrels.
- Weight: 2.25 oz (includes detent ball, screws and pin).
- Made from Carbon Steel.
- Nitride finish.
- Stainless steel adjustment screw and spring.
- 20 adjustments.
- Includes detent ball, cross pin, set screws, and hex wrenches.
To Disassemble for Periodic Cleaning:
![](/v/vspfiles/assets/images/Clamp on-1.jpg small.jpg) 1. Loosen set screw #1 2. Loosen and remove screw #2. 3.Carefully remove spring and detent ball. 4. Remove gas adjustment screw #3. 5. Soak in cleaning solvent.
|
|
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif) |
![](/v/vspfiles/templates/Fuego/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif) |
![](/v/vspfiles/templates/Fuego/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif)
![](/v/vspfiles/templates/Fuego/images/clear1x1.gif)
|